wear resistant coatings > big ceramic ball filled high temperature wear compounds

big ceramic ball filled high temperature wear compounds

BD746 large ceramic ball filled high temperature wearing resistant epoxy compounds,abrasion resistant ceramic epoxy coatings:

Product description of our BD746 high temperature wearing epoxy compounds:
BD746 high temperature ceramic bead big particle filled wear resistant coating is the high performance,high temperature resistant,
abrasion & corrosion resistant polymeric ceramic material which compounded by high performance wear resistant,corrosion resistant
material(like ceramic,silicon carbide,carborundum,titanium alloy etc) and modified toughening heat resistant resin.Widely used in the
preparation of wear & corrosion resistant coatings on the surface of various machine parts which have high temperature,abrasion resistant
and corrosion resistant requirements.The highest temperature resistant is 250 degree,the suggestion using temperature is 210 degree.

Product performance features:
1.With excellent wear resistant and corrosion resistant performance
2.With very high bonding strength to the metal substrates
3.Convenient for construction.Don't drip and slide
4.Suitable for the protection of high temperature corrosion and abrasion working condition.
5.Don’t precipitate and layering.
6.Hot water resistant,steam resistant,acid & alkali resistant.

Performance Index:

Product item		Physical states	Operation time limit(25℃)		Usable time		Range of application
BD746 high temperature big ceramic ball filled wear resistant coating		paste	40 min		24 hours		Used on the surface of various machine part which has high temperature wear resistant,corrosion resistant requirements,such as the preparation of anti wear corrosion resistant coatings in power plant,steel plant and gas flue etc.
Color	Density (g/cm³)	Compressive strength (Mpa) GB1041-2008		Tensile strength (Mpa) GB6329-2009		Shear strength (Mpa) GB7124-2008		Bending strength (Mpa) GB1042-1999	Working temperature（℃）
Grey	2.4	99		35		12		51	-60-210

How to use:
1.Surface treatment:Do the roughing treatment on the pending-repair part,grinding with angle grinder or sand blasting etc.The surface
after roughing treatment should be cleaned,the surface after this treatment should be the one roughen,dry and fresh substrates,should be no
greasy dirt and dust.

2.Preparation:Make A and B two-component mix uniformly according to the weight ratio A:B=4:1,and use it up within 40 minutes,generally
it’s while construction and configuring adhesives,every time the largest quantity of configuring adhesive is not more than 2 kilograms,
too much adhesive is solidified too fast,hasn’t been used up until the partial adhesive has solidified and can’t be used.According to the actual temperature,the configuration can be proper some more in winter,and proper some less in summer.If the temperature is too low,can properly
heat up the A component to reduce the viscosity for easy to configure.

3.Coating: The suitable coating thickness of BD746 high temperature abrasion resistant coating is 4-15mm,should make the mixed prepared
materials be coating on the pending-repair parts layer by layer,the first layer should be compacted,make it infiltrate fully with the substrates.
Should repair the surface to be smooth after the coating is coated in the suitable size,or make the low viscosity wear resistant adhesive be
coating on the surface of the coatings.This material can’t do machining,should pay attention to controlling the coating thickness,in order to
avoid appearing the interference phenomenon during the assembly.

4.Curing: It can be put into using based on curing for 24 hours at the temperature of 25 degree,if the temperature is low,should heat it up or
prolong the curing time to promote curing.Generally construction in winter,can use the iodine-tungsten lamp to do the irradiation heating with
the 40cm distance from the coatings.

Packaging Details:
Packed in a plastic drum, two-component,10Kg/group,A component: 8Kg/drum, B component: 2Kg/drum.

Storage and Warranty:
1.Sealed storage in the cool and dry place.The warranty period is 12 months.
2.Avoid placing it upside down,knocking against and transporting it as a non-dangerous product during transportation.

Product packaging photo of our BD746 big ceramic ball filled epoxy wearing compound:

------分隔线----------------------------